Web sensor with PoE — two channels with binary inputs — P8652
Спецификация P8652
Available on request
Delivery across Russia
Order phone: +7(800)777-18-50
Description
The device is equipped with two connectors for connecting remote temperature and humidity sensors and three binary inputs for two-state signals. A dry contact or a two-state voltage signal can be connected to the binary input.
ATTENTION, the device is currently discontinued.
- Specifications
- Overall dimensions drawing
- Electrical diagram
- Applications
Temperature Sensor |
|
| Measurement Range | from -55 to +105 °C |
| Accuracy | according to the connected DSxx sensor |
| Resolution | 0.1°C |
Humidity Sensor |
|
| Measurement Range | depending on the connected DSxx sensor |
| Accuracy | according to the connected DSxx sensor |
| Resolution | 0.1% relative humidity |
Binary Input |
|
| Voltage Contact Parameters | Input voltage level for «L»: < 1.0 V; Input voltage level for «H»: > 2.5 V; Internal source resistance < 2 kOhm Input voltage range from 0 to +30 V |
| Potential-free Contact Parameters | Voltage on open contact 3.3 V Current through closed contact 0.1 mA Maximum contact resistance < 5 kOhm |
General Technical Data |
|
| Operating Temperature | from -20 to +60 °C |
| Channels | 1x external nebo temperature sensor 1x connectable temperature+humidity sensor |
| Output | Ethernet |
| Measurement Interval | 2 s |
| Available Temperature Units | degrees Celsius, degrees Fahrenheit |
| Communication Protocol | WWW, ModbusTCP, SNMPv1, SOAP, XML |
| Alarm Protocols | Email, SNMP trap, system log |
| Power Supply | Power over Ethernet according to IEEE 802.3af or 5V DC |
| Protection Class | IP30 |
| Dimensions | 88 x 74 x 39.5 mm |
| Weight | approx. 125 g |
| Warranty | 3 years |
