Pneumatic pump for pressure comparison up to 100 bar — LSP 100-P
Спецификация LSP 100-P
Available on request
Delivery across Russia
Order phone: +7(800)777-18-50
Description
The LR-Cal LSP 100-P pump is used to create pressure and vacuum for measuring, regulating, and calibrating mechanical and electronic pressure gauges through comparative measurements. Pressure and vacuum comparisons can be conducted in laboratories or workshops. When the device under test and the reference measuring instrument are connected to the same pressure comparator, the pump applies the same pressure to both instruments. Calibration or adjustment can be performed by comparing the two measurement values at any pressure or vacuum level.
To ensure increased measurement accuracy, the LR-Cal LSP 100-P pump is equipped with a filtering valve. This manual pressure pump uses ambient air as the medium, demonstrating its ease of use. For high-precision calibration, the device is equipped with a fine adjustment function of ±0.1 mbar.
- Specifications
- Applications
| Technical data: | |
| Pressure: | up to +100 bar |
| Vacuum generation: | up to -0.95 bar |
| Medium: | Ambient air |
| Pressure ports: | 2 ports with swivel nut M20x1.5, with threaded adapters with 1/2" BSP thread, including sealing rings (tools for connecting tested devices are not required) Distance from both pistons: 220 mm |
| Fine adjustment: | Precise regulating valve, sensitivity ± 0.1 mbar |
| Dimensions: | 450 x 262 x 170 mm |
| Weight: | approximately 5.6 kg |
| Standard delivery scope: | 1 LR-Cal LSP 100-P pump for pressure comparison 2 threaded adapters 1/2" BSP female x M20x1.5 with sealing rings Set with spare sealing rings, 2 M20x1.5 plugs for closing pressure ports |
