Manual desktop pump for creating pressure up to 60 bar — LPP 60-T

Description

The calibration pump LR-Cal LPP 60-T is used for generating pressure or creating a vacuum to test, adjust, and calibrate mechanical and electronic pressure measuring instruments by the comparative method. These tests can be conducted in laboratories, workshops, or directly at the measurement site.

The pump is simultaneously connected to the instrument under test and a sufficiently accurate reference device, after which the pump applies pressure of the same strength to both. By comparing the readings of the two instruments, the accuracy of the instrument under test can be determined and adjusted.

Despite the small size of the LR-Cal LPP 60-T pump, it is easy to use and allows pressure to be generated to the exact required value. With the help of a special valve, the device can also be switched to vacuum mode. The pump is equipped with a valve that allows precise adjustment of the applied pressure. The reference instrument is connected to the pump from above, while the instrument under test is connected via a high-pressure hose, which includes a 1/4” internal thread adapter supplied with the device.