Manual test pumps for generating pressure up to 60 bar — LPP 40 / LPP 60
Спецификация LPP 40
Available on request
Delivery across Russia
Order phone: +7(800)777-18-50
Description
The calibration pump is used to generate pressure or create a vacuum for testing, adjusting, and calibrating mechanical and electronic pressure measuring instruments by the comparative method. These tests can be conducted in laboratories, workshops, or directly at the measurement site.
The tested instrument and a sufficiently accurate reference device are connected to the pump simultaneously, after which the pump supplies pressure of the same strength to both. By comparing the readings of the two devices, the accuracy of the tested instrument can be determined and adjusted. Despite the small size of the pump, it is easy to use and allows generating pressure precisely at the required value. With the help of a special valve, the device can also be switched to vacuum mode. The pump is equipped with a valve that allows precise adjustment of the supplied pressure. The reference instrument is connected to the pump from above, and the tested one is connected using a high-pressure hose, which includes a 1/4” internal thread adapter supplied with the device.
The following LPP pump models are available:
- LPP 40: pressure range -0.95...+40 bar
- LPP 60: pressure range -0.95...+60 bar
- Specifications
- Applications
| Specification | LPP 40 | LPP 60 |
| Pressure range | -0.95...+40 bar | -0.95...+60 bar |
| Medium | Air | |
| Process connection | Internal 1/4" BSP thread for reference instrument Internal 1/4" BSP thread for tested instrument |
|
| High pressure generation and precise adjustment |
Fine adjustment valve | |
| Overpressure | Adjusted by means of a knurled nut | |
| Material | Aluminum, brass, ABS, NBR | |
| Dimensions | 220 x 120 x 65 mm | 290 x 185 x 65 mm |
| Included | Test hose, length approximately 0.5 m | |
You may find useful
