Multifunctional Pressure Calibrator — LPC 100
Спецификация LPC 100
Available on request
Delivery across Russia
Order phone: +7(800)777-18-50
Description
The multifunctional LR-Cal LPC 100 pressure calibrator is designed for measuring pressure (using an external reference pressure sensor Keller 33X) and working with instruments that use a current loop. The calibrator can also measure DC voltage and circuit continuity.
- Measures pressure, current (milliamps), voltage, and circuit continuity
- Easily connectable interchangeable reference instrument LR-Cal LPC-1
- Milliamp power supply
- Two displays simultaneously show input and output values
- Power supply for transmitters 24 V and analog signal acquisition (4...20 mA)
- Choice between stepwise and linearly increasing function
- Data storage on included SD card
- USB interface
- Replaceable ion-lithium battery with mains charger
- Graphical display of results
Ability to easily change reference pressure sensors. Simultaneous measurement of pressure and current is an ideal solution for calibration.
A special measurement function allows precise and safe calibration of pressure switches.
The LR-Cal LPC 100 recording function allows saving data on the supplied SD card and later transferring it to a PC in the most common spreadsheet formats using the built-in USB port.
Compact size, ion-lithium battery, and high accuracy make the LR-Cal LPC 100 an ideal tool for use in the manufacturing sector.
- Specifications
- Applications
| Measured Parameter | Range | Accuracy | Resolution |
| Pressure | Depends on the sensor type 33X or 41X (see separate table) | ||
| Current mA | 0...24 mA (impedance ±17 Ohm) | 0.005% FSO ±1 digit | 1µA |
| Voltage mV | -10…+100 mV (>1MOhm) | 0.01% FSO ±1 digit | 1 µV |
| Continuity | With 100 Ohm trigger. Visual and audio confirmation | ||
| Specification | Value |
| Insulation | Max. 100 VDC between all inputs and outputs |
| Power Supply | Type: replaceable ion-lithium battery Charging time: about 5 hours Operating time: average – 8 hours (depends on used functions) |
| Charging from mains | Input voltage to calibrator: 10…15 VDC Input voltage: 115…230 VAC; 0.5 A; 50/60 Hz Output voltage: 12 VDC at 1.5 A |
| Car charger (optional): | 12 VDC at 1 A via cigarette lighter |
| Temperature ranges | Storage: -40…+60°C, including battery Operating: 0…50°C |
| Relative humidity | 0…85% RH (non-condensing) |
| Housing | ABS plastic, IP54 dust and splash protection, UL94V-0 flame retardant |
| Rubber case | Green |
| Dimensions | Without rubber case: 149 x 34 x 77 mm With rubber case: 155 x 43 x 86 mm |
| Weight | About 340 g. |
| Included in basic delivery | LR-Cal LPC 100 pressure calibrator with rubber case SD memory card Set of test probes (1 x red; 1 x black) Charger 115…230 VAC Plastic case User manual (German/English) Factory calibration certificate |
| Warranty | 24 months from delivery date |
