Carbon Monoxide Concentration Converter — E2618-CO
Спецификация E2618-CO
Available on request
Delivery across Russia
Order phone: +7(800)777-18-50
Description
The carbon monoxide concentration converter E2618-CO is a representative of the new line of multifunctional measuring instruments PluraSens®.
The detector can be used in underground parking lots, boiler rooms, kitchens, and other enclosed spaces where toxic concentrations of carbon monoxide may be reached.
The device is equipped with a fully calibrated latest-generation electrochemical sensor with temperature compensation, ensuring high stability and reliability of readings, as well as a long service life of the device.
To connect the converter to building security and automation systems, an analog output and an RS485 interface operating via the Modbus RTU protocol can be used.
ATTENTION, the device is currently discontinued.
- Specifications
- Connection
- Overall dimensions drawing
- Applications
Specifications |
|
| Target gas | carbon monoxide CO |
| Sensor type | electrochemical |
| Detection method | diffusion |
| Detection range | 0...1000 ppm CO |
| Resolution | 1 ppm CO |
| Signal update | every second |
| Response time T90 | ~ 30 seconds |
| Maintenance interval | 6 months |
| Sensor lifetime | > 6 years |
| Self-diagnostics | Full functionality check at startup |
| Warm-up time | ≤ 1 min |
| Power supply | 11...30 V DC |
| Power consumption | < 2 VA |
| Digital interface | RS485, Modbus RTU protocol |
| Analog outputs | 2 × 4-20 mA / 0-10 V, configurable |
| Housing | Gray ABS plastic, IP65 protection rating |
| Dimensions | 82 × 80 × 55 mm |
| Remote probe | shielded cable, standard length 3.0 m |
| Application area | industrial premises, outdoor use |
| Operating conditions | -20...50 °C, 15...90 %RH; no aggressive gases or products containing silicone |
