Carbon monoxide sensor with two relay outputs — E2610-CO
Спецификация E2610-CO
Available on request
Delivery across Russia
Order phone: +7(800)777-18-50
Description
Carbon Monoxide Sensor E2610-CO — a compact, easy-to-use device for indoor use.
The sensor can be used in underground parking lots, boiler rooms, kitchens, and other enclosed spaces where toxic concentrations of carbon monoxide may occur.
By default, the alarm triggers at 25 ppm and 125 ppm CO.
Thanks to two output relays with changeover contacts, the detector can be used for remote notification and ventilation system control. When threshold values are reached, an audible alarm and flashing indicator mode are also activated.
The device is equipped with a fully calibrated, latest-generation electrochemical sensor with temperature compensation, ensuring high stability and reliability of readings, as well as a long service life.
- Specifications
- Connection
- Overall Drawing
- Applications
|
Sensor |
E2610-CO |
|
Calibration |
carbon monoxide CO |
|
Sensor type |
electrochemical cell |
|
Sampling method |
diffusion |
|
CO concentration measurement range |
standard 0...200 ppm CO |
|
maximum 0...1000 ppm CO |
|
|
Resolution |
1 ppm CO |
|
Accuracy |
±(3% of range + 5 ppm CO) |
|
Sensor lifetime |
> 7 years |
|
Power supply |
24 V AC/DC or 90...265 VAC |
|
Digital interface |
UART |
|
Alarm |
flashing LED indicator, 85 dB sound signal |
|
Relay outputs |
2 relays with changeover contact |
|
250 V AC / 30 V DC, up to 5 A |
|
|
Alarm trigger thresholds |
25 / 125 ppm CO |
|
Housing |
ABS plastic with ventilation slots, IP20 |
|
Dimensions |
H85 × W85 × D36 mm |
|
Operating conditions |
-30...+70 °C, 0...95 % RH, non-condensing |
RE1, RE2 - relay outputs.
L - phase.
N - neutral.
.jpg "Duct temperature and humidity sensor — iMK duct t/RH available for purchase throughout Russia")
